SMC回轉驅動型3爪型氣爪,日本SMC氣爪
如果您對該產品感興趣的話,可以
產品名稱: SMC回轉驅動型3爪型氣爪,日本SMC氣爪
產品型號: MDBB50-55
產品展商: SMC
產品文檔: 無相關文檔
簡單介紹
SMC回轉驅動型3爪型氣爪,日本SMC氣爪
根據工件的性質、大小、使用環境及作業目的
等多方面要求的不同，氣爪的種類繁多
采用滑動導軌剛性*。
防塵、防滴、承受外力和多種環境下可使用。
根據環境可選擇防塵罩材質(氯丁橡膠、氟橡膠、
硅橡膠)以及不銹鋼(SUS304)手指。
SMC回轉驅動型3爪型氣爪,日本SMC氣爪
SMC回轉驅動型3爪型氣爪,日本SMC氣爪
的詳細介紹
SMC回轉驅動型3爪型氣爪,日本SMC氣爪
component, and their respective
configurations. A model should be selected
with a gripping force of 7 to 14 times that of the
component weight.
? If high acceleration, deceleration or impact
forces are encountered during motion, a further
margin of safety should be considered.
SMC回轉驅動型3爪型氣爪,日本SMC氣爪
with respect to component mass
? Selection of the correct model depends upon
The effective grippingforce shown in the
graphs to the right is
expressed as F, whichis the thrust of one
finger, when threefingers and
attachments are in fullcontact with the
workpiece as shown inthe figure to the right
the component mass, the coefficient of friction
between the finger attachment and the
SMC回轉驅動型3爪型氣爪,日本SMC氣爪
